THE DUAL STAND-ALONE ELECTRONIC TARGET KIT
Unlike many of our other products, this set is stand-alone, and does not interface with a large scale target practice set. Please watch the above video for a full demonstration of this set. Please note that shipping to anywhere in the United States, and Canada is included in the listed price of $95 USD.
What comes with this set?:
1x Control board
1x 9v 1A AC-DC wall adaptor (You can use batteries if you'd like, but they are not included)
2x Sensor plug-ins
1x Large LED bank plug-in
1x Loud siren
How it works:
This set comes assembled, and ready to be tested right out of the box. First things first, you need to find a target to adhere the sensor to. Once you've selected your target, use the above video instructions to adhere and seal the sensor to the target. The LED bank and siren come connected to this set. You can remove either at any point in time without issue. If you wish to disconnect, and reconnect the LED bank at any time, you need to connect the red wire to L+, and the black wire to L-. The red wire of the sensor plug connects to the V+ header, and the black wire to the V- header. There is a three pin header on the lower right side of the board which selects the LONG or SHORT program, which is talked about in detail in the video demo above. Selecting (A) will place you into SHORT mode, while selecting (B) places you into LONG mode. If you have any questions at all about any of our products, please drop us a line through our contact page. We will get back to you promptly. Thank you kindly for taking an interest in our targets!
What comes with this set?:
1x Control board
1x 9v 1A AC-DC wall adaptor (You can use batteries if you'd like, but they are not included)
2x Sensor plug-ins
1x Large LED bank plug-in
1x Loud siren
How it works:
This set comes assembled, and ready to be tested right out of the box. First things first, you need to find a target to adhere the sensor to. Once you've selected your target, use the above video instructions to adhere and seal the sensor to the target. The LED bank and siren come connected to this set. You can remove either at any point in time without issue. If you wish to disconnect, and reconnect the LED bank at any time, you need to connect the red wire to L+, and the black wire to L-. The red wire of the sensor plug connects to the V+ header, and the black wire to the V- header. There is a three pin header on the lower right side of the board which selects the LONG or SHORT program, which is talked about in detail in the video demo above. Selecting (A) will place you into SHORT mode, while selecting (B) places you into LONG mode. If you have any questions at all about any of our products, please drop us a line through our contact page. We will get back to you promptly. Thank you kindly for taking an interest in our targets!